branding on car

Taking branding on car off looks easy until one corner of the vinyl lifts a strip of clear coat with it. Maybe you are selling the vehicle or changing your company name. Maybe the graphics have simply faded. Either way, the paint underneath survives or suffers depending on how you do it. This guide covers the checks, tools and steps that protect the finish, and the signs that mean you should stop and call a professional.

Check the risks first

The vast majority of paint damage when you’re removing the branding from car traces is due to what was there in the first place. Have a look at these before you even touch a corner:

1- How old the branding is really is. Sun causes the vinyl to become brittle and hardens the adhesive, and the more sun exposure you have the faster that process goes.
2- Whether any panels were repainted. Aftermarket paint is going to lift much more easily than factory paint.
3- The condition of the clear coat. Chipped, cracked or peeling spots will allow the vinyl to grab the loose paint.
4- The quality of the vinyl. Cheap film tends to have a much harder adhesive.

Do a test peel on a hidden corner first. If it tears into small pieces or lifts the paint then don’t carry on.

Tools you need

A heat gun or hair dryer, a plastic scraper or plastic razor blade, microfibre cloths, an adhesive remover that’s safe for automotive paint (car shampoo and polish or wax will do), a steamer (works a treat on old brittle vinyl). Skip the metal blades as these will scratch the paint.

Step-by-step removal

1- Wash and dry the area so as not to drag any dirt across the paint.
2- Warm one corner with low steady heat, keeping the heat source a good few inches from the surface and moving it around.
3- Lift the corner with your fingernail or a plastic tool and peel slowly at a low angle. Reheat as you go and work in small sections.
4- Soften any leftover glue with adhesive remover on a microfibre cloth. Leave it for a minute or two then wipe. The plastic scraper is only for the really stubborn bits.
5- Wash the area to remove any remover.
6- Polish and wax to bring back the shine.

Overheating can damage the paint or stretch the vinyl so you must never hold the heat in one place.

Technician peeling vinyl branding off a car door with a heat gun

When to stop

Stop and get professional help if the vinyl shatters into confetti as soon as it warms, if clear coat lifts with the film, if paint colour transfers to the vinyl, or if the adhesive turns gummy and smears into the paint. Vehicles with several risk factors, a high resale value or a lease return are better handled by someone with the right equipment.

What to expect afterwards

After years in the sun the adhesive can leave a very faint outline of the old graphics. This is generally correctable with a bit of polish. Panels that were covered will often appear slightly more vibrant than those that were exposed as the vinyl protected them from the UV.

What shapes the price

If you hire someone, the cost of removing branding on car depends on the vehicle size, the number of panels, the age and material of the vinyl, the amount of adhesive residue, the condition of the paint underneath, the polishing needed and the labour time.

What to ask before hiring a removal service

1- Will you check the paint and clear before you start?
2- How do you deal with repainted panels?
3- What happens if the paint lifts during removal?
4- Do you polish the panels afterwards?
5- Can you brand the car panels straight after?

Replace your branding with Nova Sign

Nova Sign Printing have been doing vehicle branding in Dubai for over 10 years, right through from the individual car to the large fleet. They were awarded Excellence in Branding Solutions at the Dubai Business Awards in January 2025.

Ready for a fresh design? Send Nova Sign photos of your vehicle and your new artwork, and get a clear quote for your branding on car. Visit www.nova-sign.com and start your enquiry today.

Frequently asked questions

1- Can you remove branding from a car without damaging the paint?

Usually yes, gentle heat, plastic tools and patience. The risk goes up with old vinyl, repainted panels and weak clear coat.

2- Do I need a heat gun?

A heat gun gives you the most control. A hairdryer or steamer will do the job for smaller jobs or for old, brittle vinyl.

3- How much heat should I be using?

Low and steady. Keep the heat a few inches off the surface so as to soften the adhesive without stressing the paint.

4- What removes sticky residue?

An automotive safe adhesive remover on a microfibre cloth. Detailing clay to lift what’s left.

5- Can I use a metal razor blade?

No. Metal can scratch the paint. Use a plastic scraper or plastic razor blade.

6- Will a ghost outline stay behind?

Sometimes, especially after long exposure. Polish usually corrects it.

7- Why is old vinyl harder to remove?

UV exposure makes the film brittle and hardens the adhesive, and strong sun speeds this up.

8- When should I use a professional?

When the vinyl is old, panels are repainted, the clear coat is peeling or the vehicle is high value or on lease.

9- What affects removal pricing?

Vehicle size, panel count, vinyl age and type, residue, paint condition, polishing and labour time.

10- Does Nova Sign offer vehicle branding?

Yes. Nova Sign delivers vehicle branding in Dubai for single cars and large fleets.

After Removal: Make Sure the Paperwork Still Matches

  • If the wrap changed the colour shown on your registration, removing it changes the colour again. Check with Dubai Police whether a colour change permit is needed; as reported in October 2026 it costs AED 120 through the Dubai Police app or DubaiNow.
  • Update your Mulkiya so it matches the car, otherwise insurance and RTA inspection can be affected.
  • If the vehicle carried business adverts, the RTA advertising permit no longer applies once the branding is removed.
  • Keep photos of the paint before and after removal, which help if there is any dispute about damage.

Sources: RTA rules as summarised by dubizzle (2023) and Emirates 24|7 (October 2026). Check rta.ae and the Dubai Police app for the latest requirements.

Jahir Uddin M. Babar, CEO of Nova Sign

Written and reviewed by

CEO of Nova Sign Printing and Advertising LLC, a signage and vehicle branding company in Deira and Umm Ramool, Dubai.

Recommended Posts